Factory Resetting FJ TriggersUpdated 10 days ago

Occasionally, it may be necessary to reset your FJ system lighting and triggering devices to the factory defaults. A reset will not affect the firmware version and may maintain other customized settings such as language choice. Channel, group, and camera brand choices will often need to be readjusted after a factory reset.

FJ-T1 M (S)

1. Swipe down from the top of the screen to enter the settings menu. 
2. Scroll, by swiping or rotating the crown, down and highlight RESET
3. Touch RESET or press in on the crown to enter the RESET option.  
4. Touch YES and then YES again, to confirm reset. Touch Cancel to cancel the operation. 

FJ-X3 M (X3 S)

1. Press and hold the Sync.Menu button for approximately 3 seconds.
2. Press the down arrow on the control dial to highlight the RESET option near the bottom of the list.
3. Press the center button to select the NO option and use the up and down arrows to toggle between NO and YES.
4. Press the center button when YES is selected to apply the reset. You will be returned to the main menu.

FJ-X2

1. Locate the three round buttons under the LCD screen.
2. Press and hold both the 2nd (middle) and 3rd (far right) buttons (under the C.Fn) simultaneously for approximately 3 seconds to enter the settings menu.
3. Once in the settings menu, press the 1st (far left) button below the Reset button to perform the reset. The screen will flash briefly.
4. Press the 3rd (far right) button "OK" to return to the regular menu.