How do I Attach the Ice Light 3 Barn Doors?Updated 2 months ago
The side with the Westcott logo faces the rear; the blank side faces forward toward your subject.
On each barn door leaf, look for the Westcott logo and small orientation arrows:
- The panel with the printed Westcott logo is the back (away from the scene).
- Arrows on the hinge edge point downward when correctly oriented; the extended tip goes at the top.
To install barn doors on your IceLight 3:
- Pull back the top retention tab on the light’s LED tube.
- Insert the barn door foot into the track with the Westcott logo facing away from the LEDs and the printed arrows pointing down, aligning the hinge pins.
- Slide the leaf straight down until you hear or feel the tab snap back, securing it.
Repeat on the opposite side, verifying both leaves move freely.
How do I remove the Ice Light 3 barn doors?
Pull the top tab back, then lift each leaf straight up out of the track.
To detach barn doors without damaging the track:
- Pull back the retention tab to release the leaf.
- Grasp the bottom edge of the panel and slide it straight up until free.
- Store the barn doors flat to protect the hinge pins.